Instruction Manual

Features:
Charging Instruction:
1. Connect a USB power adapter (not included) with DC 5V /2A or above power adapter
will be required.
2. Connect the USBC cable (Included) to the charging stand.
3. Remove the USBC adapter from the charging stand, insert it into your controller.
4. Place your controller on the charging stand to start charge. It can charge two PS5
controllers simultaneously.
Indicator light identification:
Color of indicator
Working status
Off
No power connected
Green
Power connected & Fully charged
Red
Device Charging
Green &Red Flashing
Power too low for charging (less than 5V/2A)
Note:
1. Charge protection function, only when the device battery power is lower than 80%, will
begin charging.
2. The 5V power adapter with current over 2A shall be used for power supply. If the power
supply power is insufficient, the charging indicator may flash without charging.