Instruction Manual Keycode: 42895831 *Please read all the informa�on carefully before you use the product and keep the manual for future reference.
1. Specifica�on: . Sensing module 90 degrees rota�on . 4white LED light . 3*AAA ba�ery (not included ) 2. Structure Descrip�on: . Sensing module 90 degrees rota�on . 4white LED light . 3*AAA ba�ery (not included ) 3. Installa�on Descrip�on: (1) S�ck the plas�c clips with 3M glue to the cupboard or closet. (Note: the lamp bar is placed on the right side of the entrance) (2) Then push the lamp into the plas�c buckle as the direc�on shown in the above picture.
4. Direc�on For Use (1) Place the ba�ery correctly and close the ba�ery cover, (2) Set the switch to "AUTO", the LED light goes into mo�on detect mode. When in a dark area, once a person or animal enters the sensing area, the light will turn on for 30 seconds. (3) Set the switch to "ON" for Always on mode (4) Set the switch to "OFF" when not in use. 5. Detec�on distance .
6. A�en�ons . This product should be used indoors, please do not use it in direct sunlight, rains, or heavy moisture. . The sensor will not work beyond its sensing range . Ba�ery life is a rough figure, it will be different depending on the frequency and �me of use, ba�ery life from different brands will also be different. . Please check for ba�ery regularly. Remove the ba�ery when not for use in a long period. . Old and new ba�ery should not use at the same �me. . Difference type of ba�ery should not mixed.
