User Manual

02
01
Using Your Product
1. Unfold PowerSolar, use the legs
①
to support it, use the Suncast
②
to
align directly to the sun, and when the shadow of the blue dot is in the red
circle, PowerSolar will capture direct rays for a maximum charge.
2. Charge your phone and tablet using the USB-A or USB-C port. Charge
your PowerHouse using the XT60 port. If PowerSolar is working correctly,
the LED indicator will turn blue.
Note
1.PowerSolar can't store electricity directly. You will need a power bank
or PowerHouse to store power or connect PowerSolar directly to your
devices to charge.
2.Charging efficiency is subject to sunlight intensity.
3.Keep your phones and tablets away from direct sunlight. Excessive
heat may cause damage.
4.100W refers to the power of the solar panel, which is not equal to the
actual power of the output ports. There will be some power loss when
solar energy is transferred into electrical energy, so the actual power
of the output ports will be less than the power of the solar panel.
Specifications
Peak Power 100W
Rated Voltage 26.5V
Rated Current 3.77A
USB-A Output 5V
2.4A
USB-C Output 5V
3A
Size (folded) 525×470×85 mm
Size (unfolded) 1446×525×45 mm
Weight 5 kg
Important Safety Instructions
• •
Avoid dropping.
• •
Do not disassemble.
• •
Do not expose to liquids.
• •
For the safest and fastest charge, use original or certified cables.
• •
Open flame sources, such as candles, must not be placed near this
product.