User's Manual
② Slide down the lens cover. The projector will automatically power on. You can also press
on remote control to power on.
③ Turn the device towards a suitable projection surface or wall.
④ To focus the image, press (or press and hold ) and then / .
Fully charge the built-in battery before using for the first time, which will prolong the battery
lifespan.
4.4 Settings
Finish the projector settings when you power on the device for the first time.
[Image Mode]
Adjust brightness in 3 modes: Brightest / Standard / Battery
[Auto Keystone
Correction]
Enable / disable auto keystone correction.
[Keystone Correction]
Correct keystone manually. Default value is 0.
[Language]
English
[Project mode]
[Front Ceiling]: The device is hanging from the ceiling in an
upside down position. The image is rotated by 180 degrees.
[Rear Ceiling]: The device is hanging from the ceiling in an
upside down position behind the projection surface. The image is
rotated by 180 degrees and horizontal mirrored.
[Front]: The device is located in front of the projection surface.