User's Manual

Power supply: DC 19V
Power consumption: < 57 W
Standby power consumption: < 0.5W
Display technology:  0.45inch 1280*800p DLP
Light source: RGB LED
Projection image size: 12 - 150 inch
Resolution: 1280 x 800 Pixel
Brightness: 500 ANSI Lumens
Contrast ratio: 1000:1
Throw ratio: 1.2
Throw distance: 0.5m to 3m
Speaker drivers: 10w x 2
Bluetooth version: V4.1
Built-in battery type: Li-Polymer
Capacity: 19500 mAh 3.8V
Operating time: 3 hours
Remote control batteries: CR2032 x 2
Recommended ambient: 5°C to 35°C / 41°F to 95°F
Relative humidity: 15% ~ 85% (non-condensing)
Storage temperature and humidity: < 65°C / 149°F, < 90% humidity
Dimensions (W*H*D): 122 * 138 * 178 mm / 4.8 * 5.4 * 7 in
Weight: 1,483 g / 52.3 oz
7 Troubleshooting
Fail to power on by the remote control?
Make sure that the device is connected to the power supply.
Slide down the lens cover.
Fail to power on by sliding down the lens cover?
Make sure that the device is connected to the power supply.
Slide up the lens cover and wait for 10 seconds, then try again.
The remote control doesn’t work?
Remove the protective tab to activate the remote control batteries.
Blurred image?