User's Manual

4
※ after a cold room is heated;
※ when this device is placed in a damp
room.
Proceed as follows to avoid any moisture
build-up:
1 Seal this device in a plastic bag before
moving it to another room, in order for it
to adapt to room conditions.
2 Wait one to two hours before you take
the device out of the plastic bag.
The device should not be used in a very
dusty environment. Dust particles and
other foreign objects may damage the
unit.
Do not expose the device to extreme
vibrations. It may damage the internal
components.
Do not allow children to handle the
device without supervision. The packing
materials should be kept out of the hands
of children.
Power Supply
Use only the enclosed power adapter
(see chapter Appendix/ Technical Data).
Check whether the mains voltage of the
power supply matches the mains voltage
available at the setup location.
The adapter could be connected to
IT power distribution systems.
The capacity of the battery diminishes
with time. If the device functions only with
the power supply, the battery is defective.
Contact an authorized service center to
replace the battery.
Do not try to replace the battery yourself.
Incorrect handling of the battery or using
the wrong type of battery can cause
damage to the device or cause injury.
Switch the device on or off before
removing the power supply from the
socket.
Turn off the device and remove it from
the power supply before cleaning the
surface. Use a soft, lint-free cloth. Never
DANGER
Risk of explosion with
incorrect type of batteries
Do not try to replace the battery
yourself.
There is a risk of explosion if
the incorrect battery type is
used.
DANGER
High Power LED
This device is equipped with a
high power LED (Light Emitting
Diode), which emits very bright
light. Do not look directly into the
projector lens. This could cause
eye irritation or damage.