User Manual Nebula Mars Model:D2311
Table of Contents 1 General Safety Information ......................................................................... 3 Setting up the Device ................................................................................. 3 Power Supply ........................................................................................... 4 Repairs .................................................................................................... 5 2 Overview.......................................................
1 General Safety Information Do not make any changes or settings and humidity in the technical data. that are not described in this user manual. When the device is running for a long Physical injury or damage to the device period of time, the surface becomes hot or loss of data can result from improper and a warning symbol appears on the handling. Take note of all warnings and projection. Then the device switches safety notes indicated. automatically to stand by mode when it gets too hot.
※ after a cold room is heated; the power supply, the battery is defective. ※ when this device is placed in a damp Contact an authorized service center to room. replace the battery. Proceed as follows to avoid any moisture Do not try to replace the battery yourself. build-up: Incorrect handling of the battery or using 1 Seal this device in a plastic bag before the wrong type of battery can cause moving it to another room, in order for it damage to the device or cause injury.
use liquid, gaseous or easily flammable cleansers (sprays, abrasives, polishes, alcohol). Do not allow any moisture to reach the interior of the device. DANGER Danger of hearing damage Do not use the device over a longer time at high volume – especially when using headphones. This could lead to the risks of hearing damage. Repairs Do not make any repairs to the device by yourself. Any improper maintenance may result in injuries or damage to the device.
2 Overview Symbols on the Host and Adapter Symbols Explanation Class Ⅱ equipment AC voltage DC voltage Polarity of output terminals Indoor use only Energy efficiency Marking RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
electronic equipment. 3 Settings Network Projector In this section, the systems will auto-scan Touch to open the relating settings, the available networks to display on the including screen. Correction, Auto Focus, Project mode, Select one network and input password if Manual Focus. Brightness, Auto Keystone necessary to connect. App Manager Bluetooth Touch to check the current Apps The Bluetooth function enables you to information, or manage the current Apps.
Upgrade Touch to check the system upgrade. About The detailed information about the unit, including its Model, System Version, ROM/R AM, IP Address, MAC, Recovery. 4 Connecting to the Playback Device Only use the supplied cable or the cables speakers deactivate automatically when that are available as accessories to the headphones are connected. connect the projector. 3 After connecting the headphones, increase the volume to a comfortable Supplied Cables level.
5 Maintenance Battery maintenance screen. Then the device will turn off The capacity of the battery diminishes automatically. with time. To prolong the life of the After the device has cooled down, you battery, please observe the following can continue playback. instructions: week. Without a power supply, the device operates itself through the built-in store the device with a completely have sufficient capacity, the device discharged battery.
Cleaning the Lens Use a brush or lens cleaning paper to clean the lens of the projector. Deep discharge of battery Device Overheated If the device has not been used for a long A overheat icon appears if the device is period of time the battery may be deep getting too hot. The device behaves as discharged and the unit cannot be follows: switched on. 1 The speed of the fan reaches the highest level. DANGER Instructions for Cleaning! 2 When the brightness is set to a Use a soft, lint-free cloth.
6 Appendix Technical Data Dimensions (L*W*H)…mm Weight……………………….About 1815g Operating Temperature…….……….5-35℃ Packed Storage Temperature……-25-60℃ Unpacked Storage Temperature…...0-45℃ Operating Humidity……….……15-85% RH Packed Storage Humidity…..…..5-93% RH Unpacked Storage Humidity…15-85% RH Technology / Optical CPU Model No.….…..…………MST6A628 CPU Frequency………………...…. 1.5GHz Operating System …………….Android 4.4 Light source……………....………RGB LED Resolution………….……...….
This device complies with part 15 of the -- Reorient or relocate the receiving FCC Rules. Operation is subject to the antenna. following two conditions: (1) this device -- Increase the separation between the may not cause harmful interference, and (2) equipment and receiver. this device must accept any interference -- Connect the equipment into an outlet on received, including interference that may a circuit different cause undesired operation.
