User's Manual

blue.
2. Enable your device’s NFC function.
3. Put your device near the NFC chip location.
4. Click “Yes” on your device’s screen to confirm Bluetooth connection.
5. When the Bluetooth speaker and your device are successfully paired, the blue indicator will go on
and remain on while connected.
Note: When turning on the speaker, it will automatically connect to the last-connected device
(Bluetooth function needs to be enabled). When pairing with an additional device, disable the
Bluetooth function on the previous device, the speaker will automatically return to pairing mode. Then,
repeat the pairing process.
How to Recharge
When the speaker’s battery is low, the speaker will announce “Battery low”, and the red battery
indicator will flash for about 10 minutes.
1. Plug the Micro USB cable into the speaker’s Micro USB charging port.
2. Insert the remaining end of the USB power wire into (a) a USB AC adapter (not included) connected
to a wall socket, or (b) a charging computer USB port. A steady red battery indicator will show that it is
charging.
3. The red battery indicator will go off when the speaker is fully charged.
LED Indicator Instructions
LED indicator Meaning
Blue indicator rapidly flashing Pairing mode
Steady blue indicator Connected to a device
Red indicator flashing Low Battery
Steady red indicator Charging
Red indicator goes off Fully charged
Usage T ips
1. Power off the speaker when not in use and before storing.
2. The operational range of the speakers may be influenced by obstructions, such as walls, pillars, etc.
To ensure a stable connection, we recommend avoiding such obstructions whenever possible and/or
shortening the distance during use.
3. To protect the long-term performance of the battery, please do not place the speaker in high
temperatures above 140°F/60℃, such as in a hot vehicle or under direct sunlight.
4. Do not expose the speaker or any of its supplied parts to water or liquids.
FAQ and Solutions
1. Why can’t the speaker connect to my device?
a. Check to ensure your device’s Bluetooth function is enabled.
b. Make sure your device is within 3ft/1m of the speaker.
c. Delete the pairing record(s) on the speaker or your device.
2. Can I use the speaker to play music while charging?
To protect the long-term performance of the battery, it is better to charge it when the speaker is turned
off, especially when the battery is low.
3. Can I make or answer phone calls through the speaker?
No. The speaker does not feature a built-in microphone.