User's Manual

How to Recharge
When the speaker’s battery is low, the red battery indicator will flash for about 10 minutes.
1. Plug the Micro USB cable into the input port of the speaker.
2. Insert the remaining end of the USB power wire into (a) a USB AC adapter (not included) connected
to a wall socket, or (b) a charging computer USB port. A steady red battery indicator will show that it is
charging.
3. The red battery indicator will go off when the speaker is fully charged.
LED Indicator Instructions
LED indicator Meaning
Blue status indicator rapidly flashing Pairing mode
Blue status indicator slowly flashing Connected to a device
Red battery indicator flashing Low battery
Steady red battery indicator Charging
Red battery indicator goes o ff Fully charged
Usage Tips
1. Power off the speaker when not in use and before storing.
2. The operational range of the speakers may be influenced by obstructions, such as walls, pillars, etc.
To ensure a stable connection, we recommend avoiding such obstructions whenever possible and/or
shortening the distance during use.
3. To protect the long-term performance of the battery, please do not place the speaker in high
temperatures above 140°F/60℃, such as in a hot vehicle or under direct sunlight.
4. Do not expose the speaker or any of its supplied parts to rain or other liquids.
FAQ and Solutions
1. Why can’t the speaker connect to my device?
a. Check to ensure your device’s Bluetooth function is enabled.
b. Make sure your device is within 3ft/1m of the speaker.
c. Delete the pairing record(s) on the speaker or your device. When the speaker is in standby mode,
press the “Volume Down” and “Volume Up” buttons for 2 seconds to delete pairing records or reset
(when the speaker is not working normally).
2. Can I use the speaker to play music while charging?
To protect the long-term performance of the battery, it is better to charge when the speaker is turned off,
especially when the battery is low.
3. Can I make or answer phone calls through the speaker?
No. The speaker does not feature a built-in microphone.
4. Will all buttons function normally when connected to a 3.5mm audio cable?
The pause/play function (the power button) will not work.