User's Manual

5
1. This product is installed around the ship-shape control box.
2.
Note the numbers on the boat shape control box.
3. Insert the cord from the wooden box into the stern of the boat shape control box, the White Jack under number 1.
4.
Insert the horn wire into the left side of the boat shape control box, the White Jack under the number 2.
5. Insert the vibrator wire to the right of the boat shape control box, the Red Jack under the number 3.
6.Plug the power adapter into a voltage-compatible socket and the power is switched on.
Ⅴ、Common faults and troubleshooting