Instruction Manual

Anitoa Biotechnology (Hangzhou) Co., Ltd.
第 16 页 共 19 页
2) In Experiment Setup 1 (Figure 4.2-2), enter the experiment name, select the
corresponding channel, select the well position, and enter the sample information,
etc., and click "Next" to enter Experiment Setup 2.
Figure 4.2-2 Experimental setup 1
3) In Experimental Setup 2 (Figure 4.2-3), set the reaction program (parameters such
as reaction temperature, reaction time, number of cycles, photo stage,
etc.)
Figure 4.2-3 Experimental setup2