Instruction Manual

Anitoa Biotechnology (Hangzhou) Co., Ltd.
第 13 页 共 19 页
SampleTable
Location
Instrument Running
Indicator Light
Figure 3.6-2 Front of the instrument
1) Insert the DC connector into the instrument interface, and the "click" sound means that the
connector is in place
2) Open the main switch of the instrument (boat switch), and the red indicator of the instrument
will light up
3) Open the cover of the instrument, and place the test tube with collected samples on the sample
table in the picture
4) Close the flip cover and open the screen version software for use. The green indicator will light
up after the instrument is started normally.