Technical data

72
12/2009 Rev. 0.2
12/2009 Rev. 0.2
73
7.3 Dispensing cups/goblets
The machine has separate dispensing points for hot
drinks and water ( g. 30).

Hot
drinks

Hot water
Cold water (option)
See  g. 31:
1. Select your drink.
2. The blue LED above the dispensing point starts
 ashing.
3. Place your cup and press the dispensing button.
4. Your drink is prepared.
7.3.1 Strength adjustment
The machine has strength adjustment.
See  g. 32:
1. Select your drink.
2. The blue LED above the dispensing point starts
 ashing.
3. Coffee strength adjustment?
Press the 'Set' button
and set the strength
using the +/- buttons.
4. Place your cup and press the dispensing button.
5. Your drink is prepared.
COFFEE
1
2
3
COFFEE MILK & SUGAR
  




Fig. 31
Fig. 32
Fig. 30
7.4 Dispensing jugs
The machine can  ll small thermos jugs. To do this, turn
up the cup tray.
Only persons who have the key of the jug lock can us
the jug function. See  g. 33.
1. Turn the jug lock to the right.
2. Select your drink.
3. The blue LED above the dispensing point starts
 ashing.
4. Place a thermos jug under the dispensing point and
press the dispensing button.
5. Your drink is prepared.
Attention: coffee preparation progress is indicated on
the display. The coffee is made and poured into the
jug per cup.
6. When you are  nished, turn back the jug lock and
retrieve the key.
Attention: Only buttons with this
pictogram are
pre-programmed for jugs. Drink buttons without this
pictogram cannot be used for jugs. Please consult your
dealer for any deviating button settings.
Emergency stop jug: The dosing of a jug can be
stopped by simply pushing the correction/ stop
button C. After pushing this button, the chosen jug
recipe is cancelled and only one cup is dispensed.
7.4.1 Jug volume
The machine can adjust the jug volume. See  g. 34.
1. Turn the jug lock to the right.
2. Select your drink.
3. The blue LED above the dispensing point starts
 ashing.
4. The display indicates the number of cups to be
made. Volume adjustment? Use the +/- buttons to
increase or decrease the number of cups.
Attention: if the number of cups is set too high, the
jug will over ow! Coffee strength adjustment?
Press the 'Set' button
and use the +/- buttons
to set the desired strength.
5. Place a thermos jug under the dispensing point and
press the dispensing button.
6. Your drink is prepared.
7. When you are  nished, turn back the jug lock and
retrieve the key.
Attention: the jug volume adjustment function will not
work if the machine is set to paid dispensing.
1
COFFEE
2
3
4
COFFEE

  

Fig. 33
Fig. 34