User manual

Exorcist User Manual
6
This trick works because, when you start a routine, VSA sets all the outputs to the
default value, all SkullTroniX routines set the outputs to default to off, meaning the
auto on/off relay in the SkullTroniX gets turned off in the first frame. This only works
for SkullTroniX animatronics, unless you build a similar feature into your own props.
ToolTips
When navigating Exorcist you will notice that when you leave the cursor hovering
over many of the controls a tool tip message will popup giving a brief description of
that controls function and use. These are provided to assist new users learn their way
round Exorcist, but after a while the help can get annoying. If you want to disable this
feature then just go to Help and select Tool Tips OFF
.
VSA Routines Screen
The VSA Routines screen is where you tell The Exorcist which VSA routines will be
controlled and how they will be controlled. You can double click in the VSA routines
entry area to specify which VSA routines to load into each of the 8 VSA “slots”
available. For testing purposes just enter in one routine.