User manual

Exorcist User Manual

THE MISC SCREEN

A note about remote control units

The Exorcist uses Phillips RC5 control codes (there are other Phillips formats).

Universal remote controllers that default to the Phillips protocol will work right out of

the box. Other brands might need to have the codes set in order to generate compatible

remote codes. If your remote doesn’t work with the Exorcsit please read the remote

manual for instructions on how to set the codes.

On the left side of the MISC SCREEN are the defined remote keys and the remote

code used to generate them. You can double click on the yellow titles to rename them.

Just above the remote display is a series of numbers that usually begin with 12, then a

space, a number and another space and another number. EG: 12 13 1345. In the

picture above the letters No IR Code appear there. The center number is the actual key

code of the remote control button last pushed. As you press keys on the remote you

will see their numbers displayed here. If the keys you press are already defined in the

list you will also see the X appear briefly in the checkbox to the right, if the preset

codes don’t match your remote you can assign new values in the boxes next to the

code.