Specifications

1
BooBox FlexMax FI-216 Operating Manual - page 6
2
Controlling D.C. Solenoids and Relays
Use only solenoids or relays rated at the same voltage as your power supply. If your device draws more than
the 6 watts at 12 volts or 12 watts at 24 volts then see Controlling Large Solenoids and Relays.
Controlling an A.C. Outlet
Solid-state outputs cannot be used to directly control A.C. devices. These must be controlled through a relay
as shown below. If you have many of these devices to control, see our Relay Board or A.C. Relay Packs in
BooBox Output Accessories.
Controlling a Fog Machine
Standard fog machines can be controlled by hacking the remote and wiring the button to a relay. More
expensive fog machines can be connected to the BooBox with DMX.