Specifications

1
BooBox FlexMax FI-216 Operating Manual - page 3
2
Getting Familiar with your FlexMax
CONNECTIONS AND CONTROLS
Solid-State Outputs
Animation outputs (12 or 24 VDC depending on power supply).
Speaker Outputs
50 watt (25x2) stereo amplified audio output.
Audio Status LEDs
These LEDs illuminate when sound is playing. One represents the left
channel of the BooBox’s MP3 Decoder, one the left channel of Mix In.
SD Card Slot
Socket for the SD card which holds the sound and animation.
Line Out
Line-level output of the BooBox’s MP3 decoder.
MP3 Vol
Controls the Speaker Output volume of the BooBox’s MP3 decoder.
Mix In
Line-level input mixed into the amplified Speaker Output. This audio will not
be mixed into the Line Out output.
Mix Vol
Controls the Speaker Output volume of the Mix In audio.
Play Button
Tap to play the input 1 scene, or tap to stop any playing scene.
Trigger Inputs
Optically-Isolated trigger inputs for scene triggering.
DMX In/Out
DMX connector for controlling lighting or any other DMX device.
Power
12-24 VDC power input. Connected internally to the 2.1mm power input.
Servo Outputs
RC Servo outputs. These are controlled with DMX channels 4 and 5.
Power Connector
12-24 VDC power input. Connected internally to the Power terminal block.
ScareMaster
Connector
Connection for the ScareMaster animation programmer.
Expansion Connector
Easily control our relay boards or AC Relay packs using this connector.