Specifications

1
BooBox FlexMax FI-216 Operating Manual - page 23
2
Troubleshooting
TROUBLESHOOTING TABLE
Problem
Solution
None of the outputs or
sounds are working
- Make sure the number of DMX channels on your current scene is at
least 5.
ScareMaster LCD says
“Detecting BooBox”
- Make sure you have a valid SD card inserted in the BooBox.
All outputs stay on OR
Outputs don’t work anymore
- The solid-state driver chip most likely needs to be replaced. See
our website’s Replacement Parts section for more details.
Sound cuts out when using
the internal amplifier
- The power supply may be underpowered. Try reducing the volume
or swapping out the power supply with one of higher wattage.
Specifications
SPECIFICATIONS TABLE
Audio
Format
MPEG 1 and 2 Layer 3 (MP3)
Quality
Up to 320 kbit/s
Storage Type
SD Card, SDHC (cards 4GB and above) supported
Amplifier
Wattage
2 x 25 watt
Speakers
4 or 8 ohm (should be rated for at least 100 watts)
Physical
Length
6.5
Width
2.5” enclosure only, 3.75” including connectors
Height
1.25”
Weight
0.8 Lbs (0.36Kg)
Electrical
Operating Voltage
12 - 24 VDC
Power Consumption
Controller: 2.5 watts
Amplifier: Up to 50 watts
Outputs: Up to 24 watts
Solid-State Outputs
Voltage output = Power supply voltage 0.5 volts
Maximum output is 6 watts at 12VDC, 12 watts at 24 VDC