Operating instructions

Haunted House in a Box • Assembly and Operating Instructions
Animated Lighting, Inc. • Page 5
4ECHNICALSPECIlCATIONS
• Power: 120VAC input, 30A total load limit
• Input: Two +5VDC digital inputs. (For use with optional motion sensors and trigger switch.)
• Outputs: Sixteen 120VAC power outputs, each rated at 10A and one female 1/8” stereo line-
level audio output
• Enclosure: weather-resistant after cables have been appropriately connected and holes sealed
4ROUBLE3HOOTING!DVICE
A functional Haunted House in a Box has the following features:
1. Two red heartbeat LEDs that flash on the side circuit board.
2. A green LED that lights up when the unit is running the internal program.
3. A fan to keep the unit cool when controlling a large number of lights.
If these features in your Haunted House in a Box are not working properly, check to ensure both power
cords are connected to an outlet that has power.
If the unit still isn’t playing any sounds or controlling lights, perform the following steps:
1. Remove power (unplug both cords) from the Haunted House in a Box controller.
2. Remove (unplug) all motion sensors, switches, and other inputs from the controller.
3. Plug the controller back into an outlet and re-check all of the indicators.
4. If the LED indicator lights turn on but you don’t hear any audio then your unit is in trigger-only
mode (i.e. the “A” LED indicator is off) and will not play any audio or turn on any of the outputs.
Press the mode button while the controller is powered on to switch to continuous mode.
5. If you still don’t hear any audio make sure the speakers are powered on, the volume knob on the
speakers is turned up, and the speakers are connected to the controller.
There will be a yellow/amber LED that lights on the side board when one of the main fuses is blown.
These fuses are located under the plastic panels that have the channel/output numbers printed on them.
Be sure to remove power from the controller before removing the panels and the fuses.
If you’re still having problems after performing these steps, please contact Animated Lighting support
at 816-941-0400 or [e-mail] for assistance.
3UPPORT)SSUESOR1UESTIONS
• Phone: [phone] (9 a.m. to 5 p.m. CST, M-F excluding holidays)
• Email: [e-mail]
7ARRANTYAND$ISCLAIMER