IN A BOX A PRODUCT OF ANIMATED LIGHTING, INC. Assembly and Operating Instructions Animated Lighting, Inc. 13854 Wyandotte Kansas City, MO 64145 (816) 941-0400 www.animatedlighting.
Haunted House in a Box • Assembly and Operating Instructions /VERVIEW Haunted House in a Box is a plug-and-play controller from Animated Lighting designed for home and business owners to quickly build an advanced haunted scene complete with motion detection, light effects, and sound effects.
Haunted House in a Box • Assembly and Operating Instructions -AKING THE #ONNECTIONS /PEN THE "OX ,OOK FOR .UMBERS (ERE Locate the channel numbers 0 through 15 next to the power receptacles inside the box. ,OCATE THE CORD ENTRANCES Run the cords from your lights into the box through the holes on the bottom. Connecting Lights: To connect your lights to the controller, locate the channel numbers 0 through 15 next to the power receptacles on the inside of the controller box.
Haunted House in a Box • Assembly and Operating Instructions ,OCATE THE )NPUT 2ECEPTACLE You will plug the motion sensor and the hand-held trigger switch into this receptacle. Connecting inputs: Connect the motion sensor and hand-held trigger switch (supplied with an accessories pack purchased or supplied by you) to the controller by inserting the green, four-pin connector into the match green connector on the top edge of the side board.
Haunted House in a Box • Assembly and Operating Instructions All connected? Plug it in! After you have made all the connections, plug both male controller plugs coming from the bottom of the enclosure into power outlets.
Haunted House in a Box • Assembly and Operating Instructions 4ECHNICAL SPECIlCATIONS • Power: 120VAC input, 30A total load limit • Input: Two +5VDC digital inputs. (For use with optional motion sensors and trigger switch.
