User manual

LOR800W & LOR160xW g3
23
Clicking the Update Unit’s Config button sends the
new curve configuration to the controller. The
controller is updated and the text in the upper right
box changes to indicate this:
LOR800W & LOR160xW g3
24
If you use the controller’s Status Display (see
Assigning a Lighting Curve in the Status Display
section) to check the lighting curves you will see
that the controller is now using Hardware Utility
curves as indicated by “C-HS” meaning Hardware
Utility Settings:
Hardware Description
Status Display
Idle:
The Status Display rotates through four messages
when the controller is powered but not connected to
a controlling PC or Show Director and is not running
a stand-alone sequence. It is displaying the LOR
Unit ID, the DMX Universe address and “no conn”
meaning no connection to any LOR network or
DMX universe.”