User guide

Page 58
11
Setup Advanced 6 – Low Cartridge Warning Setting and Occlusion Sensitivity Setting
This screen allows you to:
Set your low cartridge warning to alert you at 10, 20, 30, 40 or 50 units remaining•
Set your occlusion detection sensitivity to High (more sensitive) or Low •
(less sensitive)
1. Use the Up/Down arrows to scroll to the desired field.
2. Press OK to change to flashing cursor for Edit mode.
3. Use the Up/Down arrows to change to desired setting.
4. Press OK when setting is made.
To move to the next Setup Advanced screen, scroll to the bottom
of the screen and highlight Next. Press OK.
To return to the Home screen, scroll to Home and press OK.
Note: The Low Cartridge Warning only alerts you one time. For example,
if you have it set to 30U and receive an alert, and then change the
setting to 20U, it will not alert at 20U until after the next cartridge
has been primed. If a bolus is delivered which causes a Low Cartridge
Warning, your remaining insulin may be less than the Warning screen
displays. If a delivery amount exceeds the low cartridge setting,
a Warning will be displayed and the delivery is canceled.
Setup Advanced 7 – Personal Settings – Insulin to Carb (I:C) Ratios
Your healthcare team may recommend you use different Insulin
to Carb ratios for different times of day. When you use the ezCarb
feature, your pump will automatically select the I:C ratio for the
current time of day.
The I:C Ratio screens allows you to:
Set different I:C ratios for 12 different time slots•
Note: If you set only one ratio, it will be used for the entire
24 hour period.
From the Setup Adv 7 screen, scroll up to I:C Ratio. Press OK.
1. The first segment always starts at midnight. The last time slot
available is 11:30pm. Use the Up/Down arrows to scroll to the
grams field.
2. Press OK to change to flashing cursor for Edit Mode.
3. Use the Up/Down arrows to change to desired setting.
4. Press OK when setting is made.