User`s manual

User’s Manual of TC Series Cutting Plotter
Question 8: Why the paper cannot return to the original point?
Answer: 1. Wrong operation on the pinch-rollers.
2. The pinch-rollers is frayed badly.
3. The paper is not loaded rightly.
4. No test running of the paper before cutting the long pattern.
Question 9: Phenomena Not Wrong.
1. The controlling-panel does not respond when the computer is restarting and the USB
cable has connected with the computer. Pull down the USB cable or wait for the
computer restarting finished, the controlling-panel will respond.
2. There are some short pauses during the cutting.
２１
3. Baudrate of TMC Series is:19200.
4. If you want to use com port,you should confirm that USB is not connected.