User's Manual
04 App installation
4
02 About the watch
2
Charging port
BioTracker
TM
sensor
Band removal
button
Force Sensing
Button
05 Pairing
5
Only use the original charger to charge your watch. The
charging plates on the back of the watch should be aligned
with those of the charger. Once the watch begins to charge,
the charging indicator will appear on the screen.
03 Charging the Watch
3
01 Package contents
1
Additional small wristbandWatch with large wristband
User Manual
Charging base
Note:
Only use the original charging base provided in the product
package to charge your watch. Also make sure that the
charging base is always kept dry.
Use your mobile phone to scan the QR code below or
search for "Amazfit" App in the Google Play store or Apple
App Store, then download and install the App.
Note:
Do not pair the watch directly using your mobile phone’s
Bluetooth settings.
Note:
1.
2.
For a better user experience, please use the most recent version
of the Amazfit App.
The operation system requires Android 5.0, iOS 10.0 or above.
06 Attaching/Detaching the watch strap
6
1.
2.
3.
Open the App on your phone register or login with your account.
Select the device to pair in the device list, then complete the
pairing as prompted.
Once the pairing is done, the watch will display the correct
time. You can set the other watch functions as needed.
1.
2.
3.
4.
Note:
After the strap is attached, please pull on the strap using
appropriate force to ensure a secure attachment.
1.
2.
Adjust the position of the strap mount to suit your wrist.
To attach or detach the watch strap, refer to the illustration below.
8
Note:
This device has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interferences in a residential installation. This
device generates, uses, and may radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
product does cause harmful interference to radio or television
reception, which can be determined by turning the device o
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
9
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit dierent
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.
07 Regulatory Notice
7
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1.
2.
FCC ID: 2AC8UA2025
Any changes or modifications that are not expressly
approved by the party responsible for the compliance may
void the user’s authority to operate the device.
This device may not cause harmful interference, and
This device must accept any interference received, including
the interference that may cause undesired operation.
08 Disposal and Recycling Information 09 Certifications and Safety Approvals
10
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference
that may cause undesired operation if the device.
IC: 21806-A2025 CAN ICES-3(B)/NMB-3(B)
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radioexempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
11
Under Industry Canada regulations, this radio transmitter may
only operate using an antenna of a type and the maximum (or
lesser) gain approved for the transmitter by Industry Canada.
To reduce the potential of radio interference to other users,
the antenna type and its gain should be so chosen that the
equivalent isotopically radiated power (e.i.r.p.) is not more than
that necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le
présent émetteur radio peut fonctionner avec une antenne
d'un type et d'un gain maximal (ou inférieur) approuvé pour
l'émetteur par Industrie Canada. Dans le but de réduire les
risques de brouillage radioélectrique à l'intention des autres
utilisateurs, il faut choisir le type d'antenne et son gain de sorte
que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne
dépasse pas l'intensité nécessaire à l'établissement d'une
communication satisfaisante.
12 13
10 Safety Notice
14
Hereby, Anhui Huami Information Technology Co.,
Ltd. declares that the radio device type A2025 is in
compliance with Directive 2014/53/EU. The full text of
the EU declaration of conformity is available at the
following internet address:
http://en.amazfit.com/support.html
For more regulatory information and product
certification/compliance logos related to Amazfit X,
please go to Regulatory on your Amazfit X.
The following symbol signifies that this device has to
be disposed separately from ordinary household
wastes at the end of its life. Please kindly be aware
that this is your responsibility to dispose the electronic
device at recycling centers so as to help conserve the
natural resources.
11 Basic specifications
15
Model: A2025
Battery capacity: 205 mAh
Input: 5V 500mA MAX
Wireless connection: Bluetooth 5.0 BLE
Frequency: 2402-2480 MHz
Max.output: 0 dBm
Operation temperature: 0℃ to 45°C
Waterproofing: 5ATM
System requirements: Android 5.0 or iOS 10.0 or above
The device is water resistant with a certified rating of 5ATM.
This means that the device is resistant to rain and can be
worn while showering. It may also be used in shallow-water
activities, such as swimming in a pool.
However, the watch should not be used when scuba diving,
bathing, taking a sauna, or in other activities involving a
high-velocity of water or the submersion below shallow depth.
Please do not operate the watch underwater. After submerging,
dry it with a dry cloth before operating or charging.
The watch is not protected against chemical reagents, acidic
or alkaline solutions, etc. Defects caused by liquid damages
are not covered under the warranty.
12 Warranty and Return Policy
16
The Amazfit Limited Warranty covers Amazfit products against
manufacturing defects beginning on the original purchase date.
The warranty period is 12 months or other period as the applicable
consumer laws in the consumer’s country of purchase require.
Our warranty is in addition to rights provided by applicable
consumer laws.
Official website: en.amazfit.com
Support: support.amazfit.com