User Guide

5 Rack Mounng Wall Mounng 6
Rack mounting your Mic Tally Gadget.
The Mic Tally Gadget sits on four rubber feet that ensure it won’t scratch or
otherwise disfigure the custom Italian marble surfaces prevalent throughout your
palatial studio.
If you prefer to rack mount your Gadget, however, you’ll need the optional Rack
Mount kit which allows one or two Gadgets to be installed side by side in a
standard 1RU rack space.
Each Rack Mount kit consists of a custom rack panel with cut outs for all front
panel controls and displays. A blank filler panel is also provided if you are
mounting only one Gadget.
When rack mounting, remove the four rubber feet (“A”) from the bottom of the
Gadget with a #1 Phillips screwdriver.
Remove the four front panel 3/32” hex screws (“B”). You can rummage around
your toolbox for your own hex key or use the one we thoughtfully provide in the
mounting kit.
Line up your Gadget so that the
holes exposed after removing the
sockethead screws line up with the
mounting holes (“C”) in the rack panel.
Attach the rack panel to the front of
your Gadget with the same screws you
just removed. If you dropped one and
it immediately rolled to an inaccessible
location as they always do, don’t panic
we’ve included spares in the kit.
Finally, use the provided rack screws
(all four, please) to mount your
Gadgets.
Wall mounting your Mic Tally Gadget.
If you prefer to secure your gadget to the inside of a rack, cabinet, or other flat
surface, the optional Wall Mount kit comes in handy.
Each Wall Mount Kit includes two brackets, four No. 6 screws, and four cup
washers.
Remove the four rubber feet (“A”) from the bottom of the Gadget with a #1 Phillips
screwdriver, being careful to save the screws.
Align the holes in the wall
Brackets with the holes in the
bottom of the Gadget, then attach
the brackets using the screws
removed from the rubber feet.
Use the four No. 6 screws (“B”)
and the four cup washers (“C”) to
secure the Gadget to a Plywood
surface.
Different hardware (not supplied)
will be required if you are
mounting the Gadget to a drywall
(or other) surface.
5 Rack Mounting
Wall Mounting 6
5 Rack Mounting
Wall Mounting 6
5 Rack Mounting
Wall Mounting 6
5 Rack Mounting
Wall Mounting 6