User's Manual

6
Operation
Pull the screen down with the lanyard or the
handle. When the screen is at the desired length,
slightly raise the screen to allow the auto-lock to
engage.
Retract the screen by using the handle or lanyard
to pull it down approximately 1 to 2 inches to
disengage the auto-lock, and slowly guide the
screen back into the case.
Important! To ensure the screen does not sustain damage during use:
• Pull the screen straight down and not at an angle to the wall.
• Gently pull the screen down, and slowly guide it up when you retract it.
• Don't let the screen scrape against the case.
• Pull from the handle, and not from the screen material itself.
• Do not touch the screen.
Maintenance
Clean the screen material with soap and water on a soft cloth. When the screen is
not in use, retract it into its case to keep the surface clean.