led port-a-cube CT-DLLEDII CT-DSLEDII CT-XSLEDII INSTRUCTIONS
Thank you for choosing Angler. The Angler LED Port-a-Cube is a foldable and portable lighting solution for product photography. It features a bright, built-in LED array, so there’s no extra assembly. The LEDs are adjusted for 5400 K color temperature and deliver clean, even, and shadowless lighting that’s flicker free, ensuring consistent exposure for every shot. The Port-aCube offers 100% to 10% dimming, and a stepless dimmer allows you to precisely dial in the desired brightness level.
Precautions Please read all instructions carefully before assembling and operating this product. Use this light with only the rated voltage on the power supply, as any misuse could risk damage or malfunction. Avoid using this light in any high-moisture environments, as this could also cause damage or malfunction. To prolong the life of the unit, turn the power off and unplug the light when it is not in use. Do not attempt to disassemble or repair this product.
Silver reflective lining A Background pocket LED strip E D B F Touch-fastener strips C Handle Top photo window 4 Mesh pocket Front photo window Closing panel
Backgrounds (gray, green, white, black) Diffusers Power adapter with dimmer Power cable 5
Assembling the LED Port-a-Cube Fold up panels A, B, and C. Make sure the touch-fastener strips are fully connected. B C A 1. 1 3. (Optional) Insert the blank end of the background into the background pocket on panel D, and match the touch-fastener pads with the touch-fastener strips on panel F. 2 Lift panels D and E to complete the enclosure. Make sure the touch-fastener strips are fully connected. E A 3 4. Rotate the Port-a-Cube so side B is on top. 4 6 D 2.
5. (Optional) Two diffusers are included. The diffuser for shooting through the top panel has a hole in the middle for your camera. The diffuser for shooting through the front panel is a plain diffuser with no hole. B A D 5 C E To attach the diffuser, pull the top open, and connect the appropriate diffuser to the touchfastener strips on tops of panels A and C so the diffuser covers the LED strip when assembled.
Packing the LED Port-a-Cube 1. Unplug the power adapter from the power outlet and the LED strip’s power cable. 2. Disassemble the LED Port-aCube so each panel is lying flat, and insert the backgrounds into the background pocket. 2 3. Fold panel B onto panel F. Make sure the LED power cable is not sticking out. 3 4. Fold in panels A, C, and E.
5. Fold the Port-a-Cube together. 5 6. Fold the flap over matching the touch fastener strips. You can store the power adapter, cables, and diffuser in the outer mesh pocket.
Specifications CT-XSLEDII (Mini) LED count 64 Color temperature 5400 K Power consumption 24 W Input power 100-240 V, 50/60 Hz, 1.0 A Output (DC) 12 V / 2 A Dimmer range 10% to 100% Dimensions 16.25" × 11.5" × 11.25" (41.3 × 29.2 × 28.5 cm) Weight 2.8 lb. (1.3 kg) CT-DSLEDII (17 in.
CT-DLLEDII (27 in.) LED count 150 Color temperature 5400 K Power consumption 65 W Input power 85–265 VAC, 50/60 Hz Output (DC) +42 V / 1.5 A max. Dimmer range 10% to 100% Dimensions 27" × 27" × 27" (69 × 69 × 69 cm) Weight 6.5 lb. (2.
One-Year Limited Warranty This Angler product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
