Bi-Color Ringlight (18 in.
Thank you for choosing Angler. Angler’s 18-inch bi-color Ringlight is ideal for photographers and videographers who need a warm, diffuse and near-shadowless light with a wide beam spread to illuminate their subjects. The 18-inch Ringlight is also perfect for personal and professional makeup and cosmetics applications, and for lighting selfies and vlogs. It runs on AC power or two NP-F batteries, so it can light your projects at home or on location.
Precautions Please read and follow these instructions, and keep this manual in a safe place. Keep this unit away from water and any flammable gases or liquids. Do not leave the device in a closed vehicle under the sun or in other areas subject to very high temperatures. Do not attempt to disassemble or repair the equipment. There are high-voltage components inside the unit. Failure to observe this precaution could result in electric shock or product malfunction.
Overview LED array under diffuser 1/4-20 socket 1/4-20 screw Locking wheel Locking knob Tilt lock Mounting Handle 4
NP-F battery slots Shoe mounts Dimmer Power input Battery check button Power switch Color temperature knob LCD screen 5/8 in.
1/4-20 mounting bolt Mini Ballhead Locking wheel Shoe lock Shoe mount Ball tension screw Smartphone Bracket Tilt lock 1/4-20 socket 6 Adjustment clamp
Mirror Locking wheel Shoe mount Also Included: AC power cord AC power adapter and cord Travel case 7
Mounting the Ringlight Light Stand 1. To mount the Ringlight on a light stand, loosen the mounting handle’s locking knob, and place the receiver over the light stand’s 5/8-inch pin. 2. Make sure the receiver fits completely around the pin before you tighten the locking knob. If it doesn’t, continue to loosen the locking knob until the fixture drops down around the pin. 3. 1 Tighten the locking knob until the Ringlight is secure.
Powering On the Light AC Power When operating on AC power, first remove the batteries. 1. Plug the power adapter into the light, and plug the power cord into an available outlet. 2. Move the power switch to ON. Battery Power When operating on battery power, unplug the power adapter from the AC outlet and from the light. 1. Place an NP-F battery into each of the battery plates, and slide them toward the contacts until they lock in place. 2. Move the power switch to ON.
Adjusting the Color Temperature and Brightness Color Temperature Turn the color temperature knob to adjust the color temperature from 3200 K (tungsten balance) to 5600 K (daylight balance). Brightness Turn the dimmer knob to adjust the output level from 0% to 100% in 1% increments.
Using the Ringlight with a Camera Attaching a camera in the center of the Ringlight is an ideal way to shoot cosmetics and fashion. To mount a camera to the Ringlight, follow these steps: 1. Loosen the mini ballhead’s locking wheel by turning it counterclockwise. 2. Screw the mini ballhead into the threaded mounting socket on the camera, and tighten the locking wheel by turning it clockwise until snug. 3. Loosen the shoe lock by turning it counterclockwise. 4.
Using the Ringlight with a Smartphone 1. Loosen the mini ballhead’s locking wheel by turning it counterclockwise . 2. Screw the mini ballhead into the threaded mounting socket on the smartphone bracket, and tighten the locking wheel by turning it clockwise until snug. 3. 2 Adjust the clamp to the width of your smartphone. 4. Slide the smartphone into the clamp, and tighten it until the phone is secure. 12 5. Loosen the shoe lock by turning it counterclockwise. 6.
Using the Mirror Use the mirror to let your subject check their hair and makeup in front of the light. To attach the mirror to the Ringlight, follow these steps: 1. Loosen the locking wheel by turning it counterclockwise. 2. Slide the mirror into either one of the Ringlight’s shoe mounts. 3. Tighten the locking wheel until secure. 3 Use one side of the mirror for normal view. Use the other side for a magnified view.
Specifications LIGHT FIXTURE LED Chip Type SMD LED Beam Angle 120° Color Temperature 3200 to 5600 K Color Accuracy Standard CRI 96.6 (5600 K) / 96.7 (4400 K) / 98.5 (3200 K) TLCI 95.2 (5600 K) / 97.7 (4400 K) / 98.6 (3200 K) Cooling System Passive Dimming Yes, 0% to 100% in 1% increments Display LED Housing Material ABS PLASTIC Light Intensity @ 3 ft. 2609 lx (3200 K) 2854 lx (4400 K) 2766 lx (5600 K) Number of LEDs 240 Expected Lamp Life 50,000 HR. Circular Panel Size 18 in. (45.
Mounting Fixture Mount 5/8 in. receiver Mount 1/4-20 threaded socket Cold-shoe mount (×2) Smartphone bracket with 1/4-20 threaded socket POWER AC Input Power 100 to 240 V AC, 50/60 Hz DC Input Power 15 to 16.8 V DC Power Adapter 15 V, 4.0 A DC Power Source AC adapter, NP-F battery (×2) Battery Run Time 2.5 HR. with 2x Watson NP-F975 Batteries Max Power Consumption 48 W Smartphone Bracket Maximum Width 4.0 in. Minimum Width 2.0 in.
One-Year Limited Warranty This Angler product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
