User Manual

Full Mode
The Glamour Flash allows you to set
the flash and modeling light to dierent
intensities. You may wish to reduce the
intensity of the modeling lamp but keep
the flash power where it is. Depress the
up or down modeling lamp buttons to the
desired level on the digital readout (2.0 to
6.0). When you are finished adjusting the
modeling light, the digital readout will blink
four times before returning to display flash
power. The FULL status LED will be lit
during this mode (2).
O
To turn o the modeling light, depress the
modeling light button until the lamp is
extinguished. The PROP and FULL status
LEDs will be o.
3
2
1
FULL
PROP
SL AVE
AUDIO
ON
OFF
SYNC
TEST
120V/60Hz
2
9