User Manual

There are three modes for the modeling
light: Proportional, Full, and O. You can
choose a mode by pressing the modeling
lamp control button, which is to the left of
the FULL and PROP LEDs. Each time you
press, the mode will change.
Proportional Mode
During normal use, most photographers
will use a monolight in “proportional” mode.
The modeling light intensity will increase or
decrease in response to changes in the flash
power. In this mode, the PROP LED will
be lit (1) and adjustments to the flash power
buttons will also adjust the power to the
modeling lamp proportionally.
Modeling Lamp Settings
3
2
1
FULL
PROP
SL AVE
AUDIO
ON
OFF
SYNC
TEST
120V/60Hz
1
8