User Manual
3
2
1
FULL
PROP
SL AVE
AUDIO
ON
OFF
SYNC
TEST
120V/60Hz
Photocell
The ANG Monolight features a photocell
which allows the flash unit to be triggered
by another flash. This is called “optical slave
mode.” The photocell is located underneath
the red transparent cover on top of the
unit. The photocell is very sensitive, but
some experimentation with positioning may
be necessary to ensure a reliable trigger,
particularly if the cell is not in the direct line
of sight of the triggering flash unit. Avoid
directly illuminating the photocell from a
continuous light source (such as ceiling lights
or windows) since this can prevent correct
operation. Very high ceilings can also aect
the operation of the photocell.
To operate your ANG Monolight as a “slave”
to another flash, disconnect any sync cords
and press the “eye” button until the bottom
status LED is on (5). The two LEDs above
this light are reserved for future features. The
bottom LED must be lit to be in slave mode.
5
11