User Manual

ManualsBrandsAngler ManualsLighting & Studio3-Monolight Portrait Back Light Kit with Case

1

2

3

4

5

6

7

8

9

TEST Button

There are three ways to trigger your ﬂash,

but the simplest is to press the TEST button.

This is useful when you need to discharge the

power built up in the ﬂash unit, for example

just before replacing the ﬂashtube (more on

that later).

Sync Connection

The sync jack on the ANG Monolight may

be used for direct connection to a camera

set to ‘X’ synchronization. Insert the “PC”

end of the supplied sync cord into the

connection on your camera (3) and the

other mini-plug end into the sync jack on

the back panel of the ANG (4). A radio slave

receiver may also be plugged into this jack.

Triggering the Flash

3

4

10