Installation & Assembly

ASSEMBLY PARTS & TOOLS:
Your Anglepoise
®
comes supplied with everything you need to assemble and install your
product. The assembly parts and tools you’ll find in the box are:
Anglepoise
®
Spanner
1 x 100115
Rawl Plug
2 x 100214
Wall Screw
2 x 100215
PARTS NOT TO SCALE
Original 1227
TM
Wall Light
BULB INFORMATION:
We recommend using either an E26 CFL or
E26 LED bulb in your product with a color
temperature of 2700K. This color temperature
is suitable for most applications.
If you require a different light output you can
use an alternative bulb.
Important:
You must not use a bulb which exceeds the
maximum wattage indicated inside the shade.
Vous ne devez pas utiliser une ampoule qui
dépasse la puissance maximale indiquée à
l’intérieur de l’abat-jour.
Instant
100%
5W
40W
20,000H
x15,000
60
102
IMPORTANT SAFETY INSTRUCTIONS TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK OR INJURY TO PERSONS.
PLEASE READ IN CONJUNCTION WITH THOSE PROVIDED IN THE
JUNCTION BOX MOUNTING KIT.
- Light bulb is replaceable – see instructions.
- Indoor use only.
- Do not look directly at the illuminated bulb.
- Keep lamp away from materials that may be flammable.
- If the power supply cord is damaged, it must be replaced by a service agent or qualified
technician to avoid any hazard.
WARNING – IDENTIFY ELECTRICAL, GAS AND PLUMBING LINES BEFORE
INSTALLATION
- Before cutting, drilling or hammering please verify their location. If needed, contact an
electrician, plumber or service person.
CAUTION - PRODUCT DAMAGE MAY OCCUR
- Never attempt to disassemble or alter the product in any way not instructed
by this manual.
CONSIGNES DE SÉCURITÉ IMPORTANTES POUR RÉDUIRE LE RISQUE
D’INCENDIE, DE DÉCHARGE ÉLECTRIQUE OU DE BLESSURE.
VEUILLEZ LIRE CES INSTRUCTIONS EN CONJONCTION AVEC CELLES
FOURNIES AVEC LE KIT DE MONTAGE DU BOÎTIER DE RACCORDEMENT.
- Ampoule remplaçable - voir les instructions.
- Utilisation en intérieur uniquement.
- Ne pas regarder directement l’ampoule allumée.
- Gardez la lampe à l’écart de matériaux pouvant s’enflammer.
- Si le cordon d’alimentation est endommagé, il doit être remplacé par un technicien qualifié
pour éviter tout danger.
AVERTISSEMENT - REPÉREZ LES CIRCUITS D’ALIMENTATION
ÉLECTRIQUE, EN GAZ ET EN EAU AVANT L’INSTALLATION
- Avant de couper, de percer ou d’utiliser un marteau, veuillez vérifier leur emplacement.
Si nécessaire, contactez un électricien, un plombier ou un technicien.
ATTENTION - LE PRODUIT RISQUE D’ETRE ENDOMMAGE
- Ne tentez jamais de démonter ou de modifier le produit d’une façon non prévue par ce
manuel.
SAVE THESE INSTRUCTIONS / CONSERVEZ CES INSTRUCTIONS