User Manual

45
3283430_GB
6. Press the knob to enter the selected
function
7. Select the chosen function by rotating
the knob
8. Press the knob to enter the selected
function
9. Select the cycle to be viewed
01/03/2010 14:00
LASAGUE 0°F
01/03/2010 19:00
PASTA +37°F
MENU
HACCP
PRINT
FREEZER 1
10. Press the knob to confirm the selected
cycle
01/03/2010 14:00
LASAGUE 0°F
01/03/2010 19:00
PASTA +37°F
MENU
HACCP
PRINT
FREEZER 1
11. Press the knob to start printing
PASTA +37°F
01/03/2010 19:00
NEEDLE +70°F AIR +70°F
MENU
HACCP
VIEW
ENTER
12. Printing in progress
PRINT ALL
NOTE: the printer is not supplied as standard equipment. It is an optional item.
Connect the printer from the rear of the unit, using the MATE-N-LOK connectors on the electrical panel,
identified with the letters R (power) and S (signal).
6. Press the knob to enter the selected
function
7. Select the chosen function by rotating
the knob
VIEW
USB
PRINT
MENU
HACCP
DELETE
BY DATE
BY CYCLE
ALL
MENU
HACCP
PRINT
BY DATE
BY CYCLE
ALL
MENU
HACCP
PRINT
IN PROGRESS
MENU
HACCP
PRINT
VIEW
USB
PRINT
MENU
HACCP
DELETE
BY DATE
BY CYCLE
ALL
MENU
HACCP
PRINT