User Manual

36
3283430_GB
- Rotate the knob to select the date and time
- Press the knob to enter the date and time
value change mode
- Select the new value by rotating the knob
- Press the knob to confirm the new value
and move to the next one
- Select to confirm and exit from the
function
During the cycle it is possible:
- to view and modify the default parameters by
selecting SET (see page 41)
- to stop the cycle by selecting STOP
Note: the modified parameters will be saved only
for the cycle in progress.
In time defrost if the times are changed the cycle
end will automatically be recalculated.
02/10/2013 17:28
12:56
SET STOP
100%
+80°F
+75°F
02/10/2013 17:28
12:56
SET STOP
100%
+80°F
+75°F
02 OTT 2013
17 : 28
SCONG
02 OTT 2013
17 : 28
SCONG
20 : 28
SCONG
02 OTT 2013
02/10/2013 20:28
12:56
SET STOP
100%
+80°F
+75°F
9. Cycle ended, automatic conservation
phase
During conservation it is possible:
- to view and modify the default parameters by
selecting SET (see page 41)
- to activate a manual defrost by selecting
- to stop the cycle by selecting STOP
Note: the modified parameters will be saved only
for the cycle in progress
If not required, manual defrosting is not performed.
--
END CYCLE
CONSERVE
100%
+80°F
+75°F
SET STOP