Instructions / Assembly

Callisto Fountain AD93678W
We hope you will find these instructions helpful in setting up your product.
If you have any issues with this item, DO NOT return the unit to place of purchase.
Please visit our web site www.angelodecor.com for assistance and warranty information.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures. Printed in China
Carefully unpack and
arrange all parts.
Lift
, align and lower
the bowl on to the
pedestal. Turn it
clockwise to lock in
place.
Pass the cords from the pump and lights down the cord
pipe and out the base of the pedestal. Align each with
the groove located at the bottom of the pedestal.
Install the cord pipe cover
over the cord pipe as
shown above.
Position the lights
inside the bowl and
place the pump in the
centre.
Locate the tubing from
the top and attach it to
the pump.
Align and lower the
top on to the bowl.
The light cord should
exit through the
groove as shown.
Securely attach the
cord from the light to
the transformer.

Summary of content (5 pages)