IMPORTANT: Please read all instructions carefully before assembling and using this product. Keep this USER MANUAL for future reference. The specifications of this product may vary from its photos. Pictures are for reference only, products are subject to actual products. IMPORTANT SAFETY INFORMATION Please read this manual carefully before assembling and using the adjustable bed. Only when the bed is properly assembled, maintained, and used, can it be used safely and effectively.
After opening the box, check the packing lists to make sure you have received all the necessary parts to assemble the bed frame. ‘When you unpack and prepare for assembly, place the product on a carpeted or padded area to prevent damage. ASSEMBLY INSTRUCTIONS Bathsheba (A) in an upside down position. (It is recommended that at least two people turn it over to prevent injury. ) B.Assemble 4 corner legs respectively. C.
Optional Leg Height: ‘Three Different Leg Heights to Fit Most Bed Frames, 4 inches, 7 inches, and combined for 11 inches.
A. Uncoil the input power cord B. Uncol the power cord and connect it to the (connected to the control box’y power supply. power port) and plug it into the power supply. PLEASE NOTE: you only need to connect the adapter (E). Other wires are already connected. Cleaning & Maintenance Clean the surface with a dry or wet soft cloth. Do not wipe with large amounts of water. After scrubbing, keep it ventilated and dry, do not expose to the sun. Make sure the motor control system is well connected before ‘use.
Key combination function function ‘When the control box Is In the cods matching state, hold for 3 seconds, the buzzer will sound once, and the remote control and the control bax are pared successfully.
5% Press and hold the key continuously, and the head and feet will descend at the same time. Sr" Release the key to stop the operation. Press and hold the key and the foot rises. Release the key to stop the operation. Press and hold the key continuously to lower the foot. Release the key to stop the operation. Press and hold the button continuously, and the flashlight on the top of the remote control ‘will be on. Release the button and the flashlight is off.
