USER’S MANUAL Contact Us ! Do NOT return this item. WICKER SWING HW69766 THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
8 9 Before You Start 8 A 9 C Read each step carefully before starting. It is very important to ensure each step followed in correct order, otherwise assembly difficulties may occur. Most of board parts are labeled or stamped on the raw B edges. Have a check to make sure all parts are included. E D Work in a spacious area, preferably on a carpet close to Notice where the unit will be used. • 50% tighten before fixing all screws, Allen wrench is Keep the handtools close at hand.
Hardware List Parts List B 1 pc A 1 pc BOLT 1 x 2 M8 x 65mm C D 1 pc 1 pc 2 x 4 3 x 4 M8 x 40mm M8 x 25mm STEEL WASHER NUT 4 x 10 5 x2 M8x20x2mm E 1 pc M10 6 x6 7 x4 M10x20x2mm M10x65mm 8 x2 9 x2 10 x 1 11 x 1 M13 04 M4 05
STEP 01 STEP 02 2 B C 4 11 A 11 1 4 3 4 06 D 11 07
STEP 03 STEP 04 10 6 6 7 8 8 5 9 8 9 6 7 9 08 09
STEP 05 Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish. Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
