CONTENTS WARNINGS MAINTENANCE Important Safety Instructions & Guidelines 2 General Care and Cleaning 12 General Assembly - Right Hand View 12 General Assembly - Left Hand View 13 Sub Assemblies 13 3 Cutaway – Right Hand View 14 3 Cutaway – Left Hand View 14 4 Mini-Regulator Service 15 Switching Angel Eyes On/Off 4 Anti-Double Ball Detent Service 15 Propellant Air/Nitrogen Supply 4 Angel Eyes Service, Removal, Test & Replacement 16 4 Micro-Pressure Indicator (Optional) 17 5
2 ANGEL FLY WARNINGS Warnings: Important Safety Instructions & Guidelines WARNING ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES WARNINGS FOR SAFE ANGEL HANDLING · The ANGEL is not a toy. · Careless or improper use, including failure to follow instructions and warnings within this Operator Manual and attached to the ANGEL could cause death or serious injury. · Do not remove or deface any warnings attached to the ANGEL.
Charging – Switching On Your ANGEL CHARGING To save the charge the isolator switch must be switched OFF to isolate the battery. OPERATION ANGEL FLY SWITCHING ON YOUR ANGEL OFF ON We recommend the isolating switch be placed in the OFF position when the ANGEL is in storage, transit or not in use. · Insert cigar lighter adaptor into a negative earth socket as found in most motor vehicles (red light on charger will illuminate to indicate that power is present).
4 ANGEL FLY OPERATION Making the ANGEL Live – Switching ANGEL Eyes On/Off – Propellant Air/Nitrogen Supply SWITCHING ANGEL EYES ON/OFF MAKING THE ANGEL LIVE PROPELLANT AIR / NITROGEN SUPPLY WARNING WARNING ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES · THE ANGEL IS LIVE AND CAPABLE OF DISCHARGING. WARNING ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES · THE ANGEL IS LIVE AND CAPABLE OF DISCHARGING. · Ensure the ANGEL is switched ON.
OPERATION Macro Line Hose – Loaders – Soft Nose Bolt Removal & Rotor Breech MACRO LINE HOSE LOADERS (HOPPERS) ANGEL FLY SOFT NOSE BOLT REMOVAL & ROTOR BREECH The ANGEL has been designed to work with all existing loaders and intelligently self adjusts its program to suit the loaders feed rates for the type of loader selected from the Advanced Menu - see page 7, but there are some important things to remember about loaders: 3 · The Angel Eyes system will shoot paint as fast as your loader is capable o
6 ANGEL FLY OPERATION Velocity Adjustment – Twist Lock Feed Collar – Volumizer Accessories VELOCITY ADJUSTMENT TWIST LOCK COLLAR FEED VOLUMIZER ACCESSORIES 3 2 1 3 1 2 WARNING ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES · THE ANGEL IS LIVE AND CAPABLE OF DISCHARGING.
Dual External LCD Menus in Safe Mode: Basic Menu – Advanced Menu DUAL EXTERNAL LCD MENUS IN SAFE MODE – BASIC MENU WARNING ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES DUAL EXTERNAL LCD MENUS IN SAFE MODE – ADVANCED MENU ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES WARNING · Ensure a barrel blocking device is fitted to the ANGEL. · Ensure the hopper is removed from the ANGEL. · Ensure that there are no paintballs in the ANGEL.
8 ANGEL FLY LCD MENUS Dual External LCD Menus in Safe Mode: Advanced Menu – Internal Electronic LCD Menus – Factory Default Setting MODE FEATURE WARNING • The BPS that these 8 balls will be fired, increases over the string of 8 shots. ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES · In certain countries local applicable laws or industry standards may mean certain modes may not be enabled or allowed. Check with law enforcement office, or local professional paintball venue.
Figure 1: Basic & Advanced Menus Press Top Button ADVANCED MENU SUB MENU 8 MROF Maximum Rate Of Fire 8 to 25 bps ON / OFF – If no signal detected, will default to OFF in 30 Secs. 9 HOPPER ‘T’ TIME TIMER Game Timer – 0.5 to 30 mins. Hold to return to 0:00 10 ALARM 1 Icon will flash – 0.5 to 30 mins. Hold to return to 0:00 11 BASIC/ADV MENU SUB MENU 1 MENU Basic / Advanced Advanced includes Basic Items.
10 ANGEL FLY LCD MENUS Figure 2: Internal Menu – Figure 3: Internal Text Programming – Figure 4: Internal PIN Programming KEY TEXT PROGRAMMING Defaults to SAFE after10 secs. Firing disabled in SAFE or menus. 1 Press Top Button PIN PROGRAMMING 1 TRIGGER Press Bottom Button 1 INTERNAL MENU SUB MENU DWELL Valve Dwell 10 - 24 milliseconds 2 TEXT Programming the PIN number can only be completed with the trigger held in and the ANGEL in ‘SAFE’ Mode. 2 PIN Press Internal to enter TEXT Mode.
Figure 5: External PIN Lock/Unlock – Figure 6: Game Timer Activation PIN LOCK / UNLOCK KEY Press Top Button 1 NOTES LCD MENUS GAME TIMER NOTES SAFE TRIGGER PIN Lock and Unlock can only becompleted with the trigger held in and the ANGEL in ‘SAFE’ Mode. Press Middle Button ANGEL FLY Switch ANGEL On. Orange and Green buttons remain operative for menus Press Bottom Button 2 LOCKED LIVE If the ANGEL is Locked, the LCD will display ‘PIN’. Enter PIN to Unlock the ANGEL.
12 ANGEL FLY MAINTENANCE General Care & Cleaning – General Assembly: Right Hand View GENERAL CARE & CLEANING WARNING ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES · Ensure a barrel blocking device is fitted to the ANGEL. · Ensure the hopper is removed from the ANGEL. · Ensure that there are no paintballs in the ANGEL. · Always remove the first stage regulator and relieve all residual gas pressure from the ANGEL before disassembly.
General Assembly: Left Hand View – Sub Assemblies TWIST LOCK GATED FEED BATTERY SPACER BATTERY SOLENOID ASSEMBLY ANTI DOUBLE BALL LPR VERNIER WHEELS END PLUG FLASH TANK CONTROL BUTTONS GRIP FRAME PCB OPTO BOARD ANGEL EYES SENSOR MINI-REGULATOR GRIP CHEEK © 2004 WDP LTD.
14 ANGEL FLY MAINTENANCE Cut Away Views: Right Hand – Left Hand © 2004 WDP LTD.
Mini-Regulator Service – Anti-Double Ball Detent Service MINI-REGULATOR SERVICE IMPORTANT NOTES: For re-assembly of components · Due care and attention must be shown to ensure you do not score or damage the bores within the mini-regulator body whilst performing maintenance. · If the small piston or large piston seal faces are damaged they must be replaced. · We recommend that you lubricate the parts during re-assembly with Love Juice Extreme Grease. · Ensure the spring stack 3 is in the correct order.
16 MAINTENANCE ANGEL FLY ANGEL Eyes Service, Removal, Test and Sensor Replacement ANGEL EYES 1 4 6 bk 2 7 5 8 3 2 5 9 5 4 1 7 7 3 WARNING ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES · Ensure a barrel blocking device is fitted to the ANGEL. · Ensure the hopper is removed from the ANGEL. · Ensure that there are no paintballs in the ANGEL. · Always remove the first stage regulator and relieve all residual gas pressure from the ANGEL before disassembly.
Micro Pressure Indicator (Optional Accessory) – LPR Adjustment MICRO PRESSURE INDICATOR (OPTIONAL) MAINTENANCE ANGEL FLY LPR ADJUSTMENT 5 WARNING 3 4 SPRING STACK ORDER ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES · Always remove the first stage regulator and relieve all residual gas pressure from the ANGEL before disassembly. · The ANGEL can hold a small residual charge of gas, typically 2 shots, with the first stage regulator removed.
18 ANGEL FLY MAINTENANCE LPR Assembly Removal – LPR Main Seal Replacement LPR MAIN SEAL REPLACEMENT LPR ASSEMBLY REMOVAL IMPORTANT NOTES: For re-assembly of components · Care must be taken so that the bore is not scored or the seals damaged. · Ensure the LPR’s pin location hole is aligned with the pin retaining hole within the ANGEL body prior to insertion. · Ensure the spring stack 8 is inserted in the correct order. · We recommend that you verify your LPR pressure if it has been removed.
Exhaust Guide Removal – Exhaust Valve Stem Removal 7 8 9 bk 5 2 3 3 1 IMPORTANT NOTES: For re-assembly of components · Care must be taken so that the bore is not scored or the seals damaged. · Ensure the exhaust valve guide body is free from damage that may score the bore. · Ensure you do not damage the exhaust valve guide sealing face. · Ensure the location hole in the exhaust valve guide is in the correct orientation to the lock hole within the main body prior to refitting.
20 ANGEL FLY MAINTENANCE Ram Stroke Adjustment – Ram Removal – Ram Servicing RAM STROKE ADJUSTMENT RAM REMOVAL RAM SERVICING 1 5 5 4 4 3 3 2 1 4 1 2 2 3 5 5 WARNING 6 7 6 7 WARNING ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES · Ensure a barrel blocking device is fitted to the ANGEL. · Ensure the hopper is removed from the ANGEL. · Ensure that there are no paintballs in the ANGEL. · Ensure the ANGEL is gassed and switched OFF.
Opto Board – Vernier Trigger Adjustments OPTO BOARD MAINTENANCE ANGEL FLY VERNIER TRIGGER ADJUSTMENTS 4 3 1 · Further fine tuning can be achieved by adjusting the toe adjuster screw 2. Clockwise will cause the trigger to activate with less trigger movement counter clockwise will result in a longer trigger stroke within the limits set by vernier thumb wheels. · Verify the trigger is functioning correctly. · Replace grip cheek cover screws using a suitable metric Allen key.
22 ANGEL FLY MAINTENANCE Vernier Trigger Wheel Removal VERNIER TRIGGER WHEEL REMOVAL A 1 1 A IMPORTANT NOTES: For re-assembly of components · Should you be unsure of the original position of the vernier wheels follow the procedure listed below for re-assembly. · Ensure the vernier wheel locking screws 1 are backed off by rotating counter clockwise. · Ensure the vernier trigger toe adjuster screw is backed off by rotating counter clockwise.
Battery Removal / Wiring Connections · Retract breech block spring 7 and lock pin 8. · Carefully feed the battery plug 9 and the solenoid plug bk that was inserted into the PCB though the ANGEL body and withdraw the wires from the rear of the ANGEL. bk bm SOLENOID BATTERY · Re-assemble in reverse order. bl 2 1 2 9 6 5 IMPORTANT NOTES: For re-assembly of components · Do not pull or apply excessive force to the wires.
24 ANGEL FLY APPENDICES Fault Finding Table – Useful Conversions USEFUL CONVERSIONS FAULT FINDING TABLE PROBLEM ANGEL WILL NOT FIRE SOLUTION PAGE No air or nitrogen present? Is the battery pack charged? The battery is not charging.
Terms of Warranty: EEC/ROW Excluding USA/Canada TERMS OF WARRANTY - EEC/R.O.W. EXCLUDING USA / CANADA Subject to the conditions set out below WDP Ltd. warrants that the ANGEL will correspond to its specification at the time of delivery and will be free from defects in materials and workmanship for a period of six months from the date of purchase. WDP Ltd gives this warranty subject to the following conditions: · Proof of purchase is required in all warranty claims. · Warranty is not transferable.
26 ANGEL FLY APPENDICES Terms of Warranty: WDP Ltd., Express Warranty USA/Canada Only WDP LTD. EXPRESS WARRANTY USA / CANADA ONLY 1. General Express Warranties. 4. Additional Consumer Protection. 7. Law and Jurisdiction. WDP Ltd.
Updates – Your Personal Details UPDATES YOUR PERSONAL DETAILS The specification and photographs in this material are for general guidance purposes only. Completing these details upon purchase will enable us to help you with your enquiries. Our products are continuously updated and changes may be made to specifications, design, or appearance from time to time. For the latest specification, virtual products and on line technical support we recommend that you visit our website: www.wdp.tv.
28 ANGEL FLY APPENDICES Notes © 2004 WDP LTD.
WARNING The ANGEL™ FLY is not a toy. Careless or improper use, including failure to follow the instructions in the Operator’s Manual, could cause death or serious injury. Paintball industry standard eye/face/ear and head protection, designed specifically for paintball games, must be worn by user and any persons within range. Do not shoot at a person at close range. Must be at least 18 years of age to purchase. Persons under 18 years of age must only use under adult supervision.
