Use and Care Manual

Use and Care Manual
Installation: According to the instructions, connect the two main
support rods together to form the main frame of the umbrella. The LED
lights are pre-installed on the eight frame ribs, requiring no additional
operation. Select a suitable location to ensure that the ground is level
and stable.
Use: Use the push rod system to adjust the height of the umbrella, use
the button to adjust the slope of the umbrella to adapt to different
sunlight angles. The solar LED lights automatically turn on or off
according to the lighting conditions. The lights come on automatically at
night or in low light.
Cleaning: Clean fabrics and frames regularly with water and a soft cloth,
avoiding chemical cleaners.
Check: Regularly check the fabric and frame for damage or wear, if
there is a problem, timely repair or replacement.
Storage: When not in use, please put the umbrella away and properly
store in a dry and ventilated place to avoid long-term exposure to
sunlight or damp environment.