SAFETY GUIDES 1. Before operating the camera, please read and follow all the Instructions In the manual. For safety reasons, always keep this user manual close to the camera. 2. The Blade VS's power input rang is 100-240VAC (50-60Hz). Always ensure the power supply input is within this rate before turning it on. 3. The camera power voltage Is 12VDC with a rated currency of 1.5A. We recommend that you use It with the original power supply adapter supplied by the factory. 4.
2. Dial Switch Setting (at the bottom of the camera): o oO) FUNCTION (ARM} swt | sW2 | Instruction 1] off | oFF | Updating mode OFF | Debugging mode — 3s | oFF | oN | Undefined Working mods El FUNCTIONARY CODE TYPE) FUNCTION{USB) SW-3 | SW4 | Instruction SW.
IR REMOTE CONTROLLER a) LED Function Instruction Prose any button and shows red: Current selection Ie to control the camera 1; Pres any bunion and shows gran: Cu rent selection i tn ironical the caner 2; Pros any button and shows bie: Current selection is to control the camera 3; CAM1/CAM2/CAM3 Short press to select the camera 1/2/3 Focus {Lefty + Manual focus, ay valid under manual focus model; Zoom (Right: + Control the He: Zoom rate; Navigation : Uprightness Innovate reign mde, use navigate key to contro
VISCERA PORT No.
VISA PROTOCOL Part! Camera Re tum Command ACK | 041 FF Re fumed when tho commend a Complete | 20.51 FF Resumed when the command haa been executed. T= caner + i package ‘Syntax Emory | 28002 | Resumed when the command forms I different or wham & command wit legal FF ‘command parameters Is accepted Command | 5.6141 | Relied when a command cannot be executed ue to current condoms. For Not ba ‘example, when commands controlling th focus manually are received during auto focus.
mans Foundation Command pace.
105 2% 720 Demode | demode 2 | 1/4000 0 cos 2 76000 1/6000 1 FTE i] TAG | 1/3500 z FT 78 73000 | 12500 3 738 id 172000 | 14750 4 75 76 TITLIST | 171250 5 FEE 75 T7000 | 1/1000 5 756 Ta TS] 1/600 7 i] EE) S00 | 1/425 Ira 8 Fi 7 T7350] 1/300 9 734 Sheer VBI [1215 To FZE 10 180 | 1/160 1 F24 ® iE 1/120 72 FZ 8 7100 1/100 i F18 1/50 1Az 168 7008 2208 Gain 4 598 Gain 12 7448 5 008 i 2B o T208 3 75am 7 Ti Db 75 3008
OSD MENU 1. Under working mod, press the menu button BI on the IR remits, to enter the OSD menu; press the menu bunion angel to exit and save modified parameters. 2. Use the navigate bunion to select the main menu, As above pictures, once been selects, the main menu wil change to Grey color background, and the right side wil show all parameters under this sub Eunuch 3. In the abscond grade menu, press the up/down navigates button to select the sub menu, use rightful navigate button to set the parameter; 4.
