Specifications

GAS CONNECTlON
Installing your ANETS Fryer requires the fol-
lowing procedure, after its legs or casters are pro-
perly attached and it is in its desired location.
1 . Ensure that the gas control valve knob
in the fryer has its OFF position next to the
valve mark.
2 . Ensure that the gas supply inlet line valve is
closed (cross-wise to the pipe line direction).
3 . Ensure that all fryer controls are set to OFF.
4 . Connect the ¾” gas supply line to the gas line
adapter on the lower rear of the fryer.
10
lNSTRUCTlONS
5 . Turn the gas supply line valve ON; then, con-
firm that all gas supply line joints and couplings
are free of leaks, using soap suds or a leak-
check solution, after the fryer is in its desired
location.
6 . Refer to Fryer Operating Instructions to
begin using your
ANETS Fryer.
! WARNlNG
DO NOT use a flame to check for leaks.