TM VIBRATING PROSTATE PLEASURE USER GUIDE
VICE 2 Overview: TM VICE 2 is a next generation anatomically designed hands-free, male G-spot stimulator combining design elements from our award winning VICE massager with many new and exciting features. With a simple contraction VICE 2 pivots inward and upward stimulating the male G-spot (prostate), anus, perineum and K-spot simultaneously. VICE 2 can be used in two powered control modes, wireless and manual and an unpowered discreet mode.
Getting Started: K-Tab Magnetic charging contacts P-Tab LED Indicator Power Button / Pattern Selector 1. Charge VICE 2 for two hours before first use. (see charging instructions) 2. Wash VICE 2 with soap and water, or a toy cleaner compatible with silicone items. 3. Lubricate VICE 2 with a water or silicone-compatible lubricant. 4. Lay on your back with both knees pulled up slightly. 5. Slowly insert the VICE 2 until the P-TAB is flush against your perineum (the area between the scrotum and anus.
VICE 2 Operating Modes: TM Discreet Discreet is an unpowered mode. The VICE 2 has been designed to be propelled by your contractions alone for focused prostate and anal stimulation. As there is no vibration associated with this mode, there is no sound to identify it is in use. Great for wearing out for some secret pleasure. Manual Manual mode enables you to use the VICE 2 without the remote. Click the power button once to turn VICE 2 on. You will notice the LED indicator is blinking.
VICE 2 Operating Modes: TM (continued) The tip of the VICE 2 remote is equipped with a special pressure sensor. Pressing on this area disengages any pattern that is currently in use and will put the motors in a variable speed mode operating in unison. The harder you press, the higher the intensity of vibration, the softer you press the lower the intensity. Releasing pressure altogether will allow the VICE 2 to return to the preset vibration pattern you were on prior to pressing the Joy Button.
VICE 2 Operating Modes: TM (continued) Power: Press and hold 2 seconds to turn the remote power on or off. *Note, the VICE 2 must be turned on manually for the remote to connect to it. If the VICE 2 is already on and vibrating in manual mode, it will stop, indicating the remote has taken control. Pressing and holding the button for 2 seconds will turn both the remote and the VICE 2 off.
Remote Charging Instructions: The VICE 2 remote takes a micro USB charging cable (included) and can be plugged into any USB port or USB/AC power adapter (not included). Insert the micro USB jack into the bottom of the remote. The remote requires 90 minutes for a full charge and will last for over 50 hours of use. • Blinking Light = Charging • Solid Light = Fully Charged VICE 2 Handling And Care: TM 1) Always clean VICE 2 before and after use.
Remote Handling And Care: 1) Wipe with a clean slightly damp lint-free cloth or towel. Do not use cleaners containing alcohol, acetone or petroleum-based solvents. 2) Avoid exposure to high heat or long periods in sunlight. 3) Avoid contact with water or other liquids. Precautions: Do not use VICE 2 on any area of the body that is swollen, inflamed or where the skin is broken. If you have concerns regarding your health, consult your doctor before using this device.
Specifications: VICE 2 Materials Silicone and ABS Plastic Size 130 x 98 x 35 mm Weight 108±5g Battery 702030 lithium / 3.7V / 370mAh Charging 120 mins Use Time 90 minutes at highest setting Max Noise Level 50- 55db Interface Single Button for 18 patterns – Manual mode RF Wireless Remote (see below) IPX IPX7. Protected against short durations of water immersion. Max immersion for less than 30 minutes and at a depth of less than one meter.
DISPOSAL INFORMATION Disposal of old electronic equipment (applicable in the EU and other European countries with separate waste collection systems):point for recycling electrical and electronic equipment. The crossed-out dustbin symbol indicates that these items should not be treated as household waste, but rather brought to the appropriate collection point for recycling electrical and electronic equipment.
