User manual

10 Anedio D1 DAC
Specifications
D/A Converter IC:
ESS Technology ES9018 Sabre Reference
32-bit DAC
Sample Rates: 44.1K-192KHz
Total Harmonic
Distortion + Noise:
0.0003% @ 1KHz, 0dBFS
0.0003% @ 20KHz, 0dBFS
Intermodulation
Distortion:
0.00015% @ 19KHz + 20KHz, 0 dBFS
2nd order IMD
Signal-to-Noise Ratio:
124 dB, 20Hz-20KHz BW, 2 Vrms
126 dB, A-weighted, 2 Vrms
DAC Master Clock Jitter: 0.5 ps rms
Total Jitter at DAC
Output:
Refer to “Measuring Jitter” on Anedio web site
Frequency Response: 20 Hz - 20 KHz (-0.15dB)
Phase: Non-inverting
Channel Separation:
130 dB @ 1KHz
120 dB @ 20KHz
Digital Inputs:
USB, SPDIF 75-ohm BNC, SPDIF 75-ohm
RCA, Toslink optical
Digital Input Resolution
and Sample Rate:
USB: 16 bits, 44.1K, 48KHz
SPDIF 75-ohm BNC: 24 bits
44.1K, 48K, 88.2K, 96K, 176.4K, 192KHz
SPDIF 75-ohm RCA: 24 bits
44.1K, 48K, 88.2K, 96K, 176.4K, 192KHz
Tosllink Optical: 24 bits
44.1K, 48K, 88.2K, 96KHz
USB Operating System
Requirement:
Windows 7, Vista, XP. Apple Mac OS X
Digital Volume Control
Steps:
0.5 dB
Volume Matching
between Channels:
Better than 0.1 dB
Line Output:
Single-ended, RCA jacks with gold-plated
contacts and teflon dielectric
Line Output Level: 2.0 Vrms (unbalanced)
Line Output Impedance: 75 ohms
Line Output Offset: 5 mV max