Operating Manual

Operating manual: Metris Vibe
Rev.: 03
ANDRITZ
Page 9 of 25
March 22, 2022
Damage
Check the deliveries immediately for visible damage upon arrival at the place of destination,
preferably in the presence of the forwarding agent.
In case of obvious transport damage proceeds as follows:
1. Take photos of the transport damage.
2. Open the damaged package only to the point where damage to components can be
verified and documented.
3. Then re-pack the damaged components carefully and store them in a dry place.
Completeness
Check the consignment for completeness using the packing list. Inform the department
responsible of any missing parts.
1.7.2 PACKAGING
Depending on the packed components, the packaging serves to provide protection or only to
cover the parts and components of the METRIS VIBE sensor.
Sealed packaging is used for very sensitive components that are to be stored in the country of
destination for a long time.
Information
Care must be taken to ensure that special packaging
is not damaged
during the inspection.
Information
Sealed packaging must not b
e opened on the way to the destination or
during handling. Customs and forwarding agents must be informed in good
time about the forthcoming arrival of such consignments. Arrange with the
customs officials to have the goods inspected on site.