Operating Manual

Operating manual: Metris Vibe
Rev.: 03
ANDRITZ
Page 7 of 25
March 22, 2022
• Incorrect start-up and operation of the METRIS VIBE sensor.
• Use of the METRIS VIBE sensor for purposes other than its intended use.
• Unauthorized structural changes or additions to the METRIS VIBE sensor that do not
conform to the basic configuration supplied and tested as well as changes to the user
software.
1.3 COPYRIGHT
This document is protected by copyright and contains confidential information belonging to
ANDRITZ and/or companies affiliated to ANDRITZ. By accepting this document, each partner
expressly confirms that he will not copy, duplicate, or make it available to third parties, nor
disclose or forward it to anyone except with the express consent of ANDRITZ or a subsidiary of
ANDRITZ.
1.4 INTENDED USE
The METRIS VIBE sensor may only be used in accordance with the present operating manual.
Any operations outside the performance limits stated in the chapter of technical specification and
result in damages for which ANDRITZ shall not accept any liability.
Intended use also includes compliance with this manual, adhering to operating conditions.
The Metris Vibe sensor is used for measuring the vibration and temperature of suitable
equipment.
It is not allowed to use the METRIS VIBE sensor for fixing purposes.
Correct and safe operation of the Metris Vibe sensor requires proper transport and storage,
installation and assembly, as well as careful operation.
1.5 NOTICE OF CLAIMS
ANDRITZ must be informed immediately of any defects or damage detected by the customer or
operating personnel or other deviations from the normal operating condition regardless of
whether they occur during or after expiry of the warranty period.
This notification to ANDRITZ should include the following information in particular:
• Description of defect or damage (symptoms, detected when and by whom)
• Identification of systems or components affected (identification number)