Operating Manual

Operating manual: Metris Vibe
Rev.: 03
ANDRITZ
Page 4 of 25
March 22, 2022
PREFACE
The present operating manual contains the information required according to valid regulations
(2014/30/EU, 2014/53/EU, 2011/65/EU, 2014/34/EU) for transport, installation, operation, and
maintenance of the vibration sensor METRIS VIBE.
The manual is intended for persons who work with the METRIS VIBE described herein.
The only way to avoid faults in the equipment and guarantee trouble-free operation is to follow
this operating manual. Thus, persons responsible must be acquainted with the present operating
manual and have access to it at all times.
The operating manual is a part of the user information for placing the equipment on the market
and must be kept in a place accessible to the operating company and to the operating personnel.
If the location of the equipment is changed, the manual and/or operating instructions must be
passed on with the equipment.
The remarks in the manual and/or operating instructions must be observed at all times during
the service life of the equipment. Read through the appropriate section in the operating
instructions carefully before starting work.
ANDRITZ does not accept any liability in the event of operating faults and any damage
that may be caused as a result of this manual not being obeyed.