Operating Manual

Operating manual: Metris Vibe
Rev.: 03
ANDRITZ
Page 16 of 25
March 22, 2022
3.3 DOWNLOADING DATA
To download data from the sensor Blue Tooth LE is used. Therfore 2 (two) possibities are
foreseen to get access to the required data.
• Industrial Gateway routers
Data is downloaded from sensor, automatically, via industrial gateway routers.
• Smartphone or Tablet
Data is downloaded from sensor, manually, using the METRIS VIBE mobile App. The
app is available for Android and IOS.
3.4 SETTINGS METRIS VIBE SENSOR
All settings have to be done via Blue Tooth LE. Therfore 2 possibities are foreseen to change
the settings.
• Industrial Gateway routers
On the webinterface it is possible to configure the settings and also check the battery
level of a sensor.
For details take a look into the manual of the industrial gateway software
• Smartphone or Tablet
Via the METRIS VIBE mobile App, available for Android and IOS, it is possible to
configure the settings for a given sensor. For details please check the METRIS VIBE
mobile App user manual.
Parameter
Description
Default value
Measurement Interval
This is the interval between the
samples which are taken of the
vibration and temperature.
360 min.
Measurement G range
(sensitivity)
This is the measuring range of the
vibrations sensor
±8g
Sampling frequency
Rate of sampling of the vibration
sensor. The frequency shown in the
FFT will be the half of the sampling
frequency.
3200Hz
Recording time
The duration of one vibration
sample which is being measured
640ms
It is very important to mount the sensor according the installation
instruction.