Operating Manual

Operating manual: Metris Vibe
Rev.: 03
ANDRITZ
Page 13 of 25
March 22, 2022
2 SAFETY
Safety instructions for components that were not manufactured by ANDRITZ are included in the
descriptions of the component suppliers and must be obeyed as well.
2.1 SAFETY INSTRUCTIONS
Everything mentioned in the Safety section is important and safety-relevant.
The warning notices mentioned in the individual sections are marked with a pictogram, signal
word, and signal color as follows:
Choice and execution of danger symbols in accordance with ADR, Dangerous Material
Ordinance, etc.
2.2 BASIC SAFETY INSTRUCTIONS
The METRIS VIBE sensor has been built according to the state of the art, as well as
acknowledged safety regulations and specifications.
CAUTION
This marking warns of an imminent health risk.
Ignoring these instructions can result in moderate or slight injuries and to
environmental and mate
rial damage.
NOTICE
This marking warns of a dangerous situation.
Ignoring these instructions can result in material damage.
Information
This marking contains useful information.
The activity described will be easier to perform professionally if
this
information is taken into consideration.