Operating Manual

Operating manual: Metris Vibe
Rev.: 03
ANDRITZ
Page 12 of 25
March 22, 2022
1.7.3.1 STORAGE OF METRIS VIBE SENSORS
The following information should be considered when putting METRIS VIBE sensors into
storage:
It is possible to storage the METRIS VIBE Ex sensors up to 2 years if the sensor is not
activated.
Storage according to storage class indicated or storage class 4 as a minimum:
• The parts must be supported securely on wooden boards covered with plastic sheeting at a
height of approximately 15-20 cm from the floor.
• Store small and, in particular, unpacked parts on storage racks.
• Take fire protection regulations into account.